Bromine

Bromine
35Br
Cl ↑ Br ↓ I Periodic table selenium ← bromine → krypton
Appearance
gas/liquid: red-brown solid: metallic luster
General properties
Name, symbol, number	bromine, Br, 35
Pronunciation	/ ˈ b r oʊ m iː n / BROH-meen or / ˈ b r oʊ m ɨ n / BROH-min
Metallic category	halogen
Group, period, block	17 (halogens), 4, p
Standard atomic weight	79.904(1)
Electron configuration	[Ar] 4s2 3d10 4p5 2, 8, 18, 7
History
Discovery	Antoine Jérôme Balard and Leopold Gmelin (1825)
First isolation	Antoine Jérôme Balard and Leopold Gmelin (1825)
Physical properties
Phase	liquid
Density (near r.t.)	(Br2, liquid) 3.1028 g·cm−3
Melting point	265.8 K, -7.2 °C, 19 °F
Boiling point	332.0 K, 58.8 °C, 137.8 °F
Critical point	588 K, 10.34 MPa
Heat of fusion	(Br2) 10.571 kJ·mol−1
Heat of vaporization	(Br2) 29.96 kJ·mol−1
Molar heat capacity	(Br2) 75.69 J·mol−1·K−1
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 185 201 220 244 276 332
Atomic properties
Oxidation states	7, 5, 4, 3, 1, -1 (strongly acidic oxide)
Electronegativity	2.96 (Pauling scale)
Ionization energies	1st: 1139.9 kJ·mol−1
	2nd: 2103 kJ·mol−1
	3rd: 3470 kJ·mol−1
Atomic radius	120 pm
Covalent radius	120±3 pm
Van der Waals radius	185 pm
Miscellanea
Crystal structure	orthorhombic
Magnetic ordering	diamagnetic
Electrical resistivity	(20 °C) 7.8×1010Ω·m
Thermal conductivity	0.122 W·m−1·K−1
Speed of sound	(20°C) 206 m·s−1
CAS registry number	7726-95-6
Most stable isotopes
Main article: Isotopes of bromine
iso NA half-life DM DE ( MeV) DP 79Br 50.69% 79Br is stable with 44 neutrons 81Br 49.31% 81Br is stable with 46 neutrons

Bromine (from Greek: βρῶμος, brómos, meaning "stench (of he-goats)") is a chemical element with the symbol Br, and atomic number of 35. It is in the halogen group (17). The element was isolated independently by two chemists, Carl Jacob Löwig and Antoine Jerome Balard, in 1825–1826. Elemental bromine is a fuming red-brown liquid at room temperature, corrosive and toxic, with properties between those of chlorine and iodine. Free bromine does not occur in nature, but occurs as colorless soluble crystalline mineral halide salts, analogous to table salt.

Bromine is rarer than about three-quarters of elements in the Earth's crust; however, the high solubility of bromide ion has caused its accumulation in the oceans, and commercially the element is easily extracted from brine pools, mostly in the United States, Israel and China. About 556,000 tonnes were produced in 2007, an amount similar to the far more abundant element magnesium.

At high temperatures, organobromine compounds are easily converted to free bromine atoms, a process which acts to terminate free radical chemical chain reactions. This makes such compounds useful fire retardants and this is bromine's primary industrial use, consuming more than half of world production of the element. The same property allows volatile organobromine compounds, under the action of sunlight, to form free bromine atoms in the atmosphere which are highly effective in ozone depletion. This unwanted side-effect has caused many common volatile brominated organics like methyl bromide, a pesticide that was formerly a large industrial bromine consumer, to be abandoned. Remaining uses of bromine compounds are in well-drilling fluids, as an intermediate in manufacture of organic chemicals, and in film photography.

Bromine has no essential function in mammals, though it is preferentially used over chloride by one antiparasitic enzyme in the human immune system. Organobromides are needed and produced enzymatically from bromide by some lower life forms in the sea, particularly algae, and the ash of seaweed was one source of bromine's discovery. As a pharmaceutical, the simple bromide ion, Br^–, has inhibitory effects on the central nervous system, and bromide salts were once a major medical sedative, before being replaced by shorter-acting drugs. They retain niche uses as antiepileptics.

Characteristics

Physical

Elemental bromine exists as a diatomic molecule, Br₂. It is a dense, mobile, slightly transparent reddish-brown liquid, that evaporates easily at standard temperature and pressures to give an orange vapor (its colour resembles nitrogen dioxide) that has a strongly disagreeable odour resembling that of chlorine. It is one of only two elements on the periodic table that are known to be liquids at room temperature (mercury is the other, although caesium, gallium, and rubidium melt just above room temperature).

At a pressure of 55  GPa (roughly 540,000 times atmospheric pressure) bromine converts to a metal. At 75 GPa it converts to a face centered orthorhombic structure. At 100 GPa it converts to a body centered orthorhombic monoatomic form.

Chemical

Being less reactive than chlorine but more reactive than iodine, bromine reacts vigorously with metals, especially in the presence of water, to give bromide salts. It is also reactive toward most organic compounds, especially upon illumination, conditions that favour the dissociation of the diatomic molecule into bromine radicals:

Br₂ 2 Br·

It bonds easily with many elements and has a strong bleaching action.

Bromine is slightly soluble in water, but it is highly soluble in organic solvents such as carbon disulfide, carbon tetrachloride, aliphatic alcohols, and acetic acid.

Isotopes

Bromine has two stable isotopes, ⁷⁹Br (50.69%) and ⁸¹Br (49.31%). At least 23 other radioisotopes are known. Many of the bromine isotopes are fission products. Several of the heavier bromine isotopes from fission are delayed neutron emitters. All of the radioactive bromine isotopes are relatively short lived. The longest half-life is the neutron deficient ⁷⁷Br at 2.376 days. The longest half-life on the neutron rich side is ⁸²Br at 1.471 days. A number of the bromine isotopes exhibit metastable isomers. Stable ⁷⁹Br exhibits a radioactive isomer, with a half-life of 4.86 seconds. It decays by isomeric transition to the stable ground state.

History

Bromine was discovered independently by two chemists, Carl Jacob Löwig and Antoine Balard, in 1825 and 1826, respectively.

Balard found bromide chemicals in the ash of seaweed from the salt marshes of Montpellier. The seaweed was used to produce iodine, but also contained bromine. Balard distilled the bromine from a solution of seaweed ash saturated with chlorine. The properties of the resulting substance resembled that of an intermediate of chlorine and iodine; with those results he tried to prove that the substance was iodine monochloride (ICl), but after failing to do so he was sure that he had found a new element and named it muride, derived from the Latin word muria for brine.

Löwig isolated bromine from a mineral water spring from his hometown Bad Kreuznach in 1825. Löwig used a solution of the mineral salt saturated with chlorine and extracted the bromine with diethyl ether. After evaporation of the ether a brown liquid remained. With this liquid as a sample for his work he applied for a position in the laboratory of Leopold Gmelin in Heidelberg. The publication of the results was delayed and Balard published his results first.

After the French chemists Louis Nicolas Vauquelin, Louis Jacques Thénard, and Joseph-Louis Gay-Lussac approved the experiments of the young pharmacist Balard, the results were presented at a lecture of the Académie des Sciences and published in Annales de Chimie et Physique. In his publication Balard states that he changed the name from muride to brôme on the proposal of M. Anglada. (Brôme (bromine) derives from the Greek βρωμος (stench).) Other sources claim that the French chemist and physicist Joseph-Louis Gay-Lussac suggested the name brôme for the characteristic smell of the vapors. Bromine was not produced in large quantities until 1860.

The first commercial use, besides some minor medical applications, was the use of bromine for the daguerreotype. In 1840 it was discovered that bromine had some advantages over the previously used iodine vapor to create the light sensitive silver halide layer used for daguerreotypy.

Potassium bromide and sodium bromide were used as anticonvulsants and sedatives in the late 19th and early 20th centuries, until they were gradually superseded by chloral hydrate and then the barbiturates.

Occurrence

The diatomic element Br₂ does not occur naturally. Instead, bromine exists exclusively as bromide salts in diffuse amounts in crustal rock. Owing to leaching, bromide salts have accumulated in sea water at 65 part per million (ppm), which is less than chloride. Bromine may be economically recovered from bromide-rich brine wells and from the Dead Sea waters (up to 50,000 ppm). It exists in the Earth's crust at an average concentration of 0.4 ppm, making it the 62nd most abundant element. The bromine concentration in soils varies normally between 5 and 40 ppm, but some volcanic soils can contain up to 500 ppm. The concentration of bromine in the atmosphere is extremely low, at only a few ppt. A large number of organobromine compounds are found in small amounts in nature.

China's bromine reserves are located in the Shandong Province and Israel's bromine reserves are contained in the waters of the Dead Sea. The largest bromine reserve in the United States is located in Columbia County and Union County, Arkansas, U.S.

Production

Bromine production is rather dynamic and has increased sixfold since the 1960s. Approximately 556,000 tonnes (worth around US $2.5 billion) was produced in 2007 worldwide, with the predominant contribution from the United States (226,000 t) and Israel (210,000 t). US production was excluded from the United States Geological Survey after 2007, and from the 380,000 tonnes mined by other countries in 2010, 140,000 t were produced by China, 130,000 t by Israel and 80,000 t by Jordan.

Bromide-rich brines are treated with chlorine gas, flushing through with air. In this treatment, bromide anions are oxidized to bromine by the chlorine gas.

2 Br⁻ + Cl₂ → 2 Cl⁻ + Br₂

Laboratory methods of production

In the laboratory, because of its commercial availability and long shelf-life, bromine is not typically prepared. Small amounts of bromine can however be generated through the reaction of solid sodium bromide with concentrated sulfuric acid (H₂SO₄). The first stage is formation of hydrogen bromide (HBr), which is a gas, but under the reaction conditions some of the HBr is oxidized further by the sulfuric acid to form bromine (Br₂) and sulfur dioxide (SO₂).

NaBr (s) + H₂SO₄ (aq) → HBr (aq) + NaHSO₄ (aq)

2 HBr (aq) + H₂SO₄ (aq) → Br₂ (g) + SO₂ (g) + 2 H₂O (l)

Non oxidizing acid alternatives, such as the use of dilute hydrobromic acid with sodium hypobromite, are also available, as the hypobromous acid formed from them is unstable in the presence of bromide, being reduced by it according to the reaction:

2 OBr^- (aq) + 4 HBr (aq) → 2Br₂ + 2H₂O + 2Br^-

The reactions are the reverse of disproportionation reactions of elemental bromine in base, and are called comproportionation. A similar reaction happens with sodium hypochlorite, acid, and chloride, leading to elemental chlorine.

Reactions involving an oxidizing agent, such as potassium permanganate or manganese dioxide, on bromide ions in the presence of an acid, also give bromine in the reactions analogous to the formation of elemental chlorine and iodine from an acid and oxidant.

Like iodine, bromine is soluble in chloroform but only slightly soluble in water. In water, the solubility can be increased by the presence of bromide ions. Concentrated solutions of bromine are rarely prepared in the lab because of hazards. As is the case with chlorine solutions or iodine solutions, sodium thiosulphate (or any soluble thiosulphate) is an effective reagent for reducing bromine to colorless odorless bromide, thus dealing with stains and odour from the element in unwanted places. For the same reason, thiosulfate ("fixer's hypo") is used in photography to deal with free bromine in silver bromide film emulsions.

Compounds and chemistry

Organic chemistry

As with other halogens, bromine substitutes for hydrogen in hydrocarbons, bonding covalently to carbon. As with other halogens, the C-Br product of this substitution is generally colorless if the corresponding C-H compound is colorless. Addition of covalently bonded bromine tends to increase the density and raise the melting point of organic compounds.

Organic compounds are brominated by either addition or substitution reactions. Bromine undergoes electrophilic addition to the double-bonds of alkenes, via a cyclic bromonium intermediate. In non-aqueous solvents such as carbon disulfide, this yields the di-bromo product. For example, reaction with ethylene will produce 1,2-dibromoethane. Bromine also undergoes electrophilic addition to phenols and anilines. When used as bromine water, a small amount of the corresponding bromohydrin is formed as well as the dibromo compound. So reliable is the reactivity of bromine that bromine water is employed as a reagent to test for the presence of alkenes, phenols, and anilines. Like the other halogens, bromine participates in free radical reactions. For example, hydrocarbons are brominated upon treatment with bromine in the presence of light.

Bromine, sometimes with a catalytic amount of phosphorus, easily brominates carboxylic acids at the α-position. This method, the Hell-Volhard-Zelinsky reaction, is the basis of the commercial route to bromoacetic acid. N-Bromosuccinimide is commonly used as a substitute for elemental bromine, being easier to handle, and reacting more mildly and thus more selectively. Organic bromides are often preferable relative to the less reactive chlorides and more expensive iodide-containing reagents. Thus, Grignard and organolithium compound are most often generated from the corresponding bromides.

Certain bromine-related compounds have been evaluated to have an ozone depletion potential or bioaccumulate in living organisms. As a result, many industrial bromine compounds are no longer manufactured, are being restricted, or scheduled for phasing out. The Montreal Protocol mentions several organobromine compounds for this phase out.

Inorganic chemistry

Inorganic bromine compounds adopt a variety of oxidation states from −1 to +7. In nature, bromide (Br^-) is by far the most common state, and departures from this -1 oxidation state are entirely due to living organisms and bromide's interaction with biologically produced oxidants, such as free oxygen.

Like other halogens, bromide ion is colorless, and forms a number of transparent ionic mineral salts, analogous to chloride. Bromide ion is highly soluble in water.

Examples of compounds for bromine's various oxidation states are shown below:

Bromine is an oxidizer, and it will oxidize iodide ions to iodine, being itself reduced to bromide:

Br₂ + 2 I⁻ → 2 Br⁻ + I₂

Bromine will also oxidize metals and metalloids to the corresponding bromides. Anhydrous bromine is less reactive toward many metals than hydrated bromine, however. Dry bromine reacts vigorously with aluminium, titanium, mercury as well as alkaline earths and alkali metals.

Dissolving bromine in alkaline solution gives a mixture of bromide and hypobromite:

Br₂ + 2 OH⁻ → Br⁻ + OBr⁻ + H₂O

This hypobromite is responsible for the bleaching abilities of bromide solutions. Warming of these solutions causes the disproportion reaction of the hypobromite to give bromate, a strong oxidising agent very similar to chlorate.

3 BrO⁻ → BrO−
3 + 2 Br⁻

In contrast to the route to perchlorates, perbromates are not accessible through electrolysis but only by reacting bromate solutions with fluorine or ozone.

BrO₃⁻ + H₂O + F₂ → BrO−
4 + 2 HF

BrO₃⁻ + O₃ → BrO−
4 + O₂

Bromine reacts violently and explosively with aluminium metal, forming aluminium bromide:

2 Al + 3 Br₂ → 2 AlBr₃

Bromine reacts with hydrogen in gaseous form and gives hydrogen bromide:

H₂ + Br₂ → 2 HBr

Bromine reacts with alkali metal iodides in a displacement reaction. This reaction forms alkali metal bromides and produces elemental iodine:

2 NaI + Br₂ → 2 NaBr + I₂

2 KI + Br₂ → 2 KBr + I₂

Applications

A wide variety of organobromine compounds are used in industry. Some are prepared from bromine and others are prepared from hydrogen bromide, which is obtained by burning hydrogen in bromine.

Illustrative of the addition reaction is the preparation of 1,2-dibromoethane, the organobromine compound produced in the largest amounts:

C₂H₄ + Br₂ → CH₂BrCH₂Br

Flame retardant

Brominated flame retardants represent a commodity of growing importance, and represent the largest commercial use of bromine. When the brominated material burns, the flame retardant produces hydrobromic acid which interferes in the radical chain reaction of the oxidation reaction of the fire. The mechanism is that the highly reactive hydrogen radicals, oxygen radicals, and hydroxy radicals react with hydrobromic acid to form less reactive bromine radicals (i.e., free bromine atoms). Bromine atoms may also react directly with other radicals to help terminate the free radical chain-reactions that characterize combustion.

To make brominated polymers and plastics, bromine-containing compounds can incorporated into the polymer during polymerization. One method is to include a relatively small amount of brominated monomer during the polymerization process. For example, vinyl bromide can be used in the production of polyethylene, polyvinylchloride or polypropylene. Specific highly brominated molecules can also be added that participate in the polymerization process For example, tetrabromobisphenol A can be added to polyesters or epoxy resins, where it becomes part of the polymer. Epoxys used in printed circuit boards are normally made from such flame retardant resins, indicated by the FR in the abbreviation of the products ( FR-4 and FR-2). In some cases the bromine containing compound may be added after polymerization. For example, decabromodiphenyl ether can be added to the final polymers.

A number of gaseous or highly volatile brominated halomethane compounds are non-toxic and make superior fire suppressant agents by this same mechanism, and are particular effective in enclosed spaces such as submarines, airplanes, and spacecraft. However, they are expensive and their production and use has been greatly curtailed due to their effect as ozone-depleting agents. They are no longer used in routine fire extinguishers, but retain niche uses in aerospace and military automatic fire-suppression applications. They include bromochloromethane (Halon 1011, CH₂BrCl), bromochlorodifluoromethane (Halon 1211, CBrClF₂), and bromotrifluoromethane (Halon 1301, CBrF₃).

Gasoline additive

Ethylene bromide was an additive in gasolines containing lead anti- engine knocking agents. It scavenges lead by forming volatile lead bromide, which is exhausted from the engine. This application accounted for 77% of the bromine use in 1966 in the US. This application has declined since the 1970s due to environmental regulations (see below).

Pesticide

Poisonous methyl bromide was widely used as pesticide to fumigate soil and to fumigate housing, by the tenting method. Ethylene bromide was similarly used. These volatile organobromine compounds are all now regulated as ozone depletion agents. The Montreal Protocol on Substances that Deplete the Ozone scheduled the phase out for the ozone depleting chemical by 2005, and organobromide pesticides are no longer used (in housing fumagation they have been replaced by such compounds as sulfuryl fluoride, which contain neither the chlorine or bromine organics which harm ozone). Prior to the Montreal protocol in 1991 (for example) an estimated 35,000 tonnes of the chemical were used to control nematodes, fungi, weeds and other soil-borne diseases.

Medical and veterinary

Use. Bromide compounds, especially potassium bromide, were frequently used as general sedatives in the 19th and early 20th century. Bromides in the form of simple salts are still used as anticonvulsants in both veterinary and human medicine, although the latter use varies from country to country. For example, the U.S. Food and Drug Administration (FDA) does not approve bromide for the treatment of any disease, and it was removed from over-the-counter sedative products like Bromo-Seltzer, in 1975. Thus, bromide levels are not routinely measured by medical laboratories in the U.S. However, U.S. veterinary medical diagnostic testing laboratories will measure blood bromide levels on request, as an aid to treatment of epilepsy in dogs.

Toxicity. Long-term use of potassium bromide (or any bromide salt) can lead to bromism. This state of central nervous system depression causes the moderate toxicity of bromide in multi-gram doses for humans and other mammals. The very long half-life of bromide ion in the body (~12 days) also contributes to toxicity from bromide build-up in body fluids. Bromide ingestion may also cause a skin eruption resembling acne.

Other uses

• The bromides of calcium, sodium, and zinc account for a sizable part of the bromine market. These salts form dense solutions in water that are used as drilling fluids sometimes called clear brine fluids.
• Bromine is also used in the production of brominated vegetable oil, which is used as an emulsifier in many citrus-flavored soft drinks (for example, Mountain Dew). After the introduction in the 1940s the compound was extensively used until the UK and the US limited its use in the mid 1970s and alternative emulsifiers were developed.
  Soft drinks containing brominated vegetable oil are still sold in the US (2011).

• Several dyes, agrichemicals, and pharmaceuticals are organobromine compounds. 1-Bromo-3-chloropropane, 1-bromoethylbenzene, and 1-bromoalkanes are prepared by the antimarkovnikov addition of HBr to alkenes. Ethidium bromide, EtBr, is used as a DNA stain in gel electrophoresis.
• High refractive index compounds
• Bromine, like chlorine, is used in maintenance of swimming pools, especially spas (hot tubs), where it is generated in situ from a bromide plus hydrogen peroxide. In spas, the high water temperatures render chlorinated water purification and buffering compounds unstable, and bromine compounds may improve the life of the free-halogen antimicrobial.
• Water purification compounds, disinfectants and insecticides, such as tralomethrin (C₂₂H₁₉Br₄NO₃).
• Potassium bromide is used in some photographic developers to inhibit the formation of fog (undesired reduction of silver).
• Bromine vapor is used as the second step in sensitizing daguerreotype plates to be developed under mercury vapor. Bromine acts as an accelerator to the light sensitivity of the previously iodized plate.
• Bromine is also used to reduce mercury pollution from coal-fired power plants. This can be achieved either by treating activated carbon with bromine or by injecting bromine compounds onto the coal prior to combustion.
• Bromine can also be artificially substituted for the methyl substituent in the nitrogenous base thymine of DNA, creating the base analog 5-bromouracil. When this base is incorporated into DNA its different hydrogen bonding properties may cause mutation at the site of that base pair. The compound 5-bromouracil is thus an artificial mutagen.

Biological role

Bromine has no known essential role in human or mammalian health, but inorganic bromine and organobromine compounds do occur naturally, and some may be of use to higher organisms in dealing with parasites. For example, in the presence of H₂O₂ formed by the eosinophil, and either chloride or bromide ions, eosinophil peroxidase provides a potent mechanism by which eosinophils kill multicellular parasites (such as, for example, the nematode worms involved in filariasis); and also certain bacteria (such as tuberculosis bacteria). Eosinophil peroxidase is a haloperoxidase that preferentially uses bromide over chloride for this purpose, generating hypobromite ( hypobromous acid).

Marine organisms are the main source of organobromine compounds. Over 1600 compounds were identified by 1999. The most abundant one is methyl bromide (CH₃Br) with an estimated 56,000 tonnes produced by marine algae each year. The essential oil of the Hawaiian alga Asparagopsis taxiformis consists of 80% methyl bromide. Most of such organobromine compounds in the sea are made via the action of a unique algal enzyme, vanadium bromoperoxidase. Though this enzyme is the most prolific creator of organic bromides by living organisms, other bromoperoxidases exist in nature that do not use vanadium.

A famous example of a bromine-containing organic compound that has been used by humans since ancient times is the fabric dye Tyrian purple. The brominated indole indigo dye is produced by a medium-sized predatory sea snail, the marine gastropod Murex brandaris. The organobromine nature of the compound was not discovered until 1909 (see Paul Friedländer).

Safety

Elemental bromine is toxic and causes burns. As an oxidizing agent, it is incompatible with most organic and inorganic compounds. Care needs to be taken when transporting bromine; it is commonly carried in steel tanks lined with lead, supported by strong metal frames.

When certain ionic compounds containing bromine are mixed with potassium permanganate (KMnO₄) and an acidic substance, they will form a pale brown cloud of bromine gas.

6 Br^– + 2 MnO−
4 + 8 H⁺ → 3 Br₂ + 2 MnO₂ + 4 H₂O

This gas smells like bleach and is very irritating to the mucous membranes. Upon exposure, one should move to fresh air immediately. If symptoms of bromine poisoning arise, medical attention is needed.