Classical mechanics

Background Information

SOS believes education gives a better chance in life to children in the developing world too. Click here for more information on SOS Children.

Classical mechanics
History Timeline
Branches Statics Dynamics Kinetics Kinematics Applied mechanics Celestial mechanics Continuum mechanics Statistical mechanics
Formulations Newtonian mechanics (Vectorial mechanics) Analytical mechanics ( Lagrangian mechanics Hamiltonian mechanics)
Fundamental concepts Space Time Mass Inertia Velocity Speed Acceleration Force Momentum Impulse Torque / Moment / Couple Angular momentum Moment of inertia Frame of reference Energy (kinetic potential) Mechanical work Mechanical power Virtual work D'Alembert's principle
Core topics Rigid body ( dynamics Euler's equations) Motion ( linear) Euler's laws of motion Newton's laws of motion Newton's law of universal gravitation Equations of motion Inertial / Non-inertial reference frame Fictitious force Mechanics of planar particle motion Displacement (vector) Relative velocity Friction Simple harmonic motion Harmonic oscillator Vibration Damping ( ratio)
Rotational motion Circular motion ( uniform non-uniform) Rotating reference frame Centripetal force Centrifugal force ( rotating reference frame reactive) Coriolis force Pendulum Tangential / Rotational speed Angular acceleration Angular velocity Angular frequency Angular displacement
Scientists Galileo Newton Kepler Horrocks Halley Euler d'Alembert Clairaut Lagrange Laplace Hamilton Poisson Daniel / Johann Bernoulli Cauchy

In physics, classical mechanics is one of the two major sub-fields of mechanics, which is concerned with the set of physical laws describing the motion of bodies under the action of a system of forces. The study of the motion of bodies is an ancient one, making classical mechanics one of the oldest and largest subjects in science, engineering and technology.

Classical mechanics describes the motion of macroscopic objects, from projectiles to parts of machinery, as well as astronomical objects, such as spacecraft, planets, stars, and galaxies. Besides this, many specializations within the subject deal with gases, liquids, solids, and other specific sub-topics. Classical mechanics provides extremely accurate results as long as the domain of study is restricted to large objects and the speeds involved do not approach the speed of light. When the objects being dealt with become sufficiently small, it becomes necessary to introduce the other major sub-field of mechanics, quantum mechanics, which reconciles the macroscopic laws of physics with the atomic nature of matter and handles the wave–particle duality of atoms and molecules. In the case of high velocity objects approaching the speed of light, classical mechanics is enhanced by special relativity. General relativity unifies special relativity with Newton's law of universal gravitation, allowing physicists to handle gravitation at a deeper level.

The term classical mechanics was coined in the early 20th century to describe the system of physics begun by Isaac Newton and many contemporary 17th century natural philosophers, building upon the earlier astronomical theories of Johannes Kepler, which in turn were based on the precise observations of Tycho Brahe and the studies of terrestrial projectile motion of Galileo. Since these aspects of physics were developed long before the emergence of quantum physics and relativity, some sources exclude Einstein's theory of relativity from this category. However, a number of modern sources do include relativistic mechanics, which in their view represents classical mechanics in its most developed and most accurate form.

The initial stage in the development of classical mechanics is often referred to as Newtonian mechanics, and is associated with the physical concepts employed by and the mathematical methods invented by Newton himself, in parallel with Leibniz, and others. This is further described in the following sections. Later, more abstract and general methods were developed, leading to reformulations of classical mechanics known as Lagrangian mechanics and Hamiltonian mechanics. These advances were largely made in the 18th and 19th centuries, and they extend substantially beyond Newton's work, particularly through their use of analytical mechanics. Ultimately, the mathematics developed for these were central to the creation of quantum mechanics.

History

Some Greek philosophers of antiquity, among them Aristotle, founder of Aristotelian physics, may have been the first to maintain the idea that "everything happens for a reason" and that theoretical principles can assist in the understanding of nature. While to a modern reader, many of these preserved ideas come forth as eminently reasonable, there is a conspicuous lack of both mathematical theory and controlled experiment, as we know it. These both turned out to be decisive factors in forming modern science, and they started out with classical mechanics.

The medieval "science of weights" (i.e., mechanics) owes much of its importance to the work of Jordanus de Nemore. In the Elementa super demonstrationem ponderum, he introduces the concept of "positional gravity" and the use of component forces.

Three stage Theory of impetus according to Albert of Saxony.

The first published causal explanation of the motions of planets was Johannes Kepler's Astronomia nova published in 1609. He concluded, based on Tycho Brahe's observations of the orbit of Mars, that the orbits were ellipses. This break with ancient thought was happening around the same time that Galileo was proposing abstract mathematical laws for the motion of objects. He may (or may not) have performed the famous experiment of dropping two cannon balls of different weights from the tower of Pisa, showing that they both hit the ground at the same time. The reality of this experiment is disputed, but, more importantly, he did carry out quantitative experiments by rolling balls on an inclined plane. His theory of accelerated motion derived from the results of such experiments, and forms a cornerstone of classical mechanics.

Sir Isaac Newton (1643–1727), an influential figure in the history of physics and whose three laws of motion form the basis of classical mechanics

As foundation for his principles of natural philosophy, Isaac Newton proposed three laws of motion: the law of inertia, his second law of acceleration (mentioned above), and the law of action and reaction; and hence laid the foundations for classical mechanics. Both Newton's second and third laws were given proper scientific and mathematical treatment in Newton's Philosophiæ Naturalis Principia Mathematica, which distinguishes them from earlier attempts at explaining similar phenomena, which were either incomplete, incorrect, or given little accurate mathematical expression. Newton also enunciated the principles of conservation of momentum and angular momentum. In mechanics, Newton was also the first to provide the first correct scientific and mathematical formulation of gravity in Newton's law of universal gravitation. The combination of Newton's laws of motion and gravitation provide the fullest and most accurate description of classical mechanics. He demonstrated that these laws apply to everyday objects as well as to celestial objects. In particular, he obtained a theoretical explanation of Kepler's laws of motion of the planets.

Newton previously invented the calculus, of mathematics, and used it to perform the mathematical calculations. For acceptability, his book, the Principia, was formulated entirely in terms of the long-established geometric methods, which were soon eclipsed by his calculus. However it was Leibniz who developed the notation of the derivative and integral preferred today.

Hamilton's greatest contribution is perhaps the reformulation of Newtonian mechanics, now called Hamiltonian mechanics.

Newton, and most of his contemporaries, with the notable exception of Huygens, worked on the assumption that classical mechanics would be able to explain all phenomena, including light, in the form of geometric optics. Even when discovering the so-called Newton's rings (a wave interference phenomenon) his explanation remained with his own corpuscular theory of light.

After Newton, classical mechanics became a principal field of study in mathematics as well as physics. After Newton, several re-formulations progressively allowed finding solutions to a far greater number of problems. The first notable re-formulation was in 1788 by Joseph Louis Lagrange. Lagrangian mechanics was in turn re-formulated in 1833 by William Rowan Hamilton.

Some difficulties were discovered in the late 19th century that could only be resolved by more modern physics. Some of these difficulties related to compatibility with electromagnetic theory, and the famous Michelson–Morley experiment. The resolution of these problems led to the special theory of relativity, often included in the term classical mechanics.

A second set of difficulties were related to thermodynamics. When combined with thermodynamics, classical mechanics leads to the Gibbs paradox of classical statistical mechanics, in which entropy is not a well-defined quantity. Black-body radiation was not explained without the introduction of quanta. As experiments reached the atomic level, classical mechanics failed to explain, even approximately, such basic things as the energy levels and sizes of atoms and the photo-electric effect. The effort at resolving these problems led to the development of quantum mechanics.

Since the end of the 20th century, the place of classical mechanics in physics has been no longer that of an independent theory. Instead, classical mechanics is now considered an approximate theory to the more general quantum mechanics. Emphasis has shifted to understanding the fundamental forces of nature as in the Standard model and its more modern extensions into a unified theory of everything. Classical mechanics is a theory for the study of the motion of non-quantum mechanical, low-energy particles in weak gravitational fields. In the 21st century classical mechanics has been extended into the complex domain and complex classical mechanics exhibits behaviors very similar to quantum mechanics.

Description of the theory

The analysis of projectile motion is a part of classical mechanics.

The following introduces the basic concepts of classical mechanics. For simplicity, it often models real-world objects as point particles, objects with negligible size. The motion of a point particle is characterized by a small number of parameters: its position, mass, and the forces applied to it. Each of these parameters is discussed in turn.

In reality, the kind of objects that classical mechanics can describe always have a non-zero size. (The physics of very small particles, such as the electron, is more accurately described by quantum mechanics). Objects with non-zero size have more complicated behaviour than hypothetical point particles, because of the additional degrees of freedom—for example, a baseball can spin while it is moving. However, the results for point particles can be used to study such objects by treating them as composite objects, made up of a large number of interacting point particles. The centre of mass of a composite object behaves like a point particle.

Classical mechanics uses common-sense notions of how matter and forces exist and interact. It assumes that matter and energy have definite, knowable attributes such as where an object is in space and its speed. It also assumes that objects may be directly influenced only by their immediate surroundings, known as the principle of locality. In quantum mechanics objects may have unknowable position or velocity, or instantaneously interact with other objects at a distance.

Position and its derivatives

The SI derived "mechanical" (that is, not electromagnetic or thermal) units with kg, m and s
position	m
angular position/angle	unitless (radian)
velocity	m·s⁻¹
angular velocity	s⁻¹
acceleration	m·s⁻²
angular acceleration	s⁻²
jerk	m·s⁻³
"angular jerk"	s⁻³
specific energy	m²·s⁻²
absorbed dose rate	m²·s⁻³
moment of inertia	kg·m²
momentum	kg·m·s⁻¹
angular momentum	kg·m²·s⁻¹
force	kg·m·s⁻²
torque	kg·m²·s⁻²
energy	kg·m²·s⁻²
power	kg·m²·s⁻³
pressure and energy density	kg·m⁻¹·s⁻²
surface tension	kg·s⁻²
spring constant	kg·s⁻²
irradiance and energy flux	kg·s⁻³
kinematic viscosity	m²·s⁻¹
dynamic viscosity	kg·m⁻¹·s⁻¹
density (mass density)	kg·m⁻³
density (weight density)	kg·m⁻²·s⁻²
number density	m⁻³
action	kg·m²·s⁻¹

The position of a point particle is defined with respect to an arbitrary fixed reference point, O, in space, usually accompanied by a coordinate system, with the reference point located at the origin of the coordinate system. It is defined as the vector r from O to the particle. In general, the point particle need not be stationary relative to O, so r is a function of t, the time elapsed since an arbitrary initial time. In pre-Einstein relativity (known as Galilean relativity), time is considered an absolute, i.e., the time interval between any given pair of events is the same for all observers. In addition to relying on absolute time, classical mechanics assumes Euclidean geometry for the structure of space.

Velocity and speed

The velocity, or the rate of change of position with time, is defined as the derivative of the position with respect to time or

$\mathbf{v} = {\mathrm{d}\mathbf{r} \over \mathrm{d}t}\,\!$ .

In classical mechanics, velocities are directly additive and subtractive. For example, if one car traveling east at 60 km/h passes another car traveling east at 50 km/h, then from the perspective of the slower car, the faster car is traveling east at 60 − 50 = 10 km/h. Whereas, from the perspective of the faster car, the slower car is moving 10 km/h to the west. Velocities are directly additive as vector quantities; they must be dealt with using vector analysis.

Mathematically, if the velocity of the first object in the previous discussion is denoted by the vector u = ud and the velocity of the second object by the vector v = ve, where u is the speed of the first object, v is the speed of the second object, and d and e are unit vectors in the directions of motion of each particle respectively, then the velocity of the first object as seen by the second object is

$\mathbf{u}' = \mathbf{u} - \mathbf{v} \, .$

Similarly,

$\mathbf{v'}= \mathbf{v} - \mathbf{u} \, .$

When both objects are moving in the same direction, this equation can be simplified to

$\mathbf{u}' = ( u - v ) \mathbf{d} \, .$

Or, by ignoring direction, the difference can be given in terms of speed only:

$u' = u - v \, .$

Acceleration

The acceleration, or rate of change of velocity, is the derivative of the velocity with respect to time (the second derivative of the position with respect to time) or

$\mathbf{a} = {\mathrm{d}\mathbf{v} \over \mathrm{d}t}.$

Acceleration can arise from a change with time of the magnitude of the velocity or of the direction of the velocity or both. If only the magnitude v of the velocity decreases, this is sometimes referred to as deceleration, but generally any change in the velocity with time, including deceleration, is simply referred to as acceleration.

Forces; Newton's second law

Newton was the first to mathematically express the relationship between force and momentum. Some physicists interpret Newton's second law of motion as a definition of force and mass, while others consider it a fundamental postulate, a law of nature. Either interpretation has the same mathematical consequences, historically known as "Newton's Second Law":

$\mathbf{F} = {\mathrm{d}\mathbf{p} \over \mathrm{d}t} = {\mathrm{d}(m \mathbf{v}) \over \mathrm{d}t}.$

The quantity mv is called the ( canonical) momentum. The net force on a particle is thus equal to rate of change of momentum of the particle with time. Since the definition of acceleration is a = dv/dt, the second law can be written in the simplified and more familiar form:

$\mathbf{F} = m \mathbf{a} \, .$

So long as the force acting on a particle is known, Newton's second law is sufficient to describe the motion of a particle. Once independent relations for each force acting on a particle are available, they can be substituted into Newton's second law to obtain an ordinary differential equation, which is called the equation of motion.

As an example, assume that friction is the only force acting on the particle, and that it may be modeled as a function of the velocity of the particle, for example:

$\mathbf{F}_{\rm R} = - \lambda \mathbf{v} \, ,$

where λ is a positive constant. Then the equation of motion is

$- \lambda \mathbf{v} = m \mathbf{a} = m {\mathrm{d}\mathbf{v} \over \mathrm{d}t} \, .$

This can be integrated to obtain

$\mathbf{v} = \mathbf{v}_0 e^{- \lambda t / m}$

where v₀ is the initial velocity. This means that the velocity of this particle decays exponentially to zero as time progresses. In this case, an equivalent viewpoint is that the kinetic energy of the particle is absorbed by friction (which converts it to heat energy in accordance with the conservation of energy), slowing it down. This expression can be further integrated to obtain the position r of the particle as a function of time.

Important forces include the gravitational force and the Lorentz force for electromagnetism. In addition, Newton's third law can sometimes be used to deduce the forces acting on a particle: if it is known that particle A exerts a force F on another particle B, it follows that B must exert an equal and opposite reaction force, −F, on A. The strong form of Newton's third law requires that F and −F act along the line connecting A and B, while the weak form does not. Illustrations of the weak form of Newton's third law are often found for magnetic forces.

Work and energy

If a constant force F is applied to a particle that achieves a displacement Δr, the work done by the force is defined as the scalar product of the force and displacement vectors:

$W = \mathbf{F} \cdot \Delta \mathbf{r} \, .$

More generally, if the force varies as a function of position as the particle moves from r₁ to r₂ along a path C, the work done on the particle is given by the line integral

$W = \int_C \mathbf{F}(\mathbf{r}) \cdot \mathrm{d}\mathbf{r} \, .$

If the work done in moving the particle from r₁ to r₂ is the same no matter what path is taken, the force is said to be conservative. Gravity is a conservative force, as is the force due to an idealized spring, as given by Hooke's law. The force due to friction is non-conservative.

The kinetic energy E_k of a particle of mass m travelling at speed v is given by

$E_\mathrm{k} = \tfrac{1}{2}mv^2 \, .$

For extended objects composed of many particles, the kinetic energy of the composite body is the sum of the kinetic energies of the particles.

The work–energy theorem states that for a particle of constant mass m the total work W done on the particle from position r₁ to r₂ is equal to the change in kinetic energy E_k of the particle:

$W = \Delta E_\mathrm{k} = E_\mathrm{k,2} - E_\mathrm{k,1} = \tfrac{1}{2}m\left(v_2^{\, 2} - v_1^{\, 2}\right) \, .$

Conservative forces can be expressed as the gradient of a scalar function, known as the potential energy and denoted E_p:

$\mathbf{F} = - \mathbf{\nabla} E_\mathrm{p} \, .$

If all the forces acting on a particle are conservative, and E_p is the total potential energy (which is defined as a work of involved forces to rearrange mutual positions of bodies), obtained by summing the potential energies corresponding to each force

$\mathbf{F} \cdot \Delta \mathbf{r} = - \mathbf{\nabla} E_\mathrm{p} \cdot \Delta \mathbf{r} = - \Delta E_\mathrm{p} \Rightarrow - \Delta E_\mathrm{p} = \Delta E_\mathrm{k} \Rightarrow \Delta (E_\mathrm{k} + E_\mathrm{p}) = 0 \, .$

This result is known as conservation of energy and states that the total energy,

$\sum E = E_\mathrm{k} + E_\mathrm{p} \, .$

is constant in time. It is often useful, because many commonly encountered forces are conservative.

Beyond Newton's laws

Classical mechanics also includes descriptions of the complex motions of extended non-pointlike objects. Euler's laws provide extensions to Newton's laws in this area. The concepts of angular momentum rely on the same calculus used to describe one-dimensional motion. The rocket equation extends the notion of rate of change of an object's momentum to include the effects of an object "losing mass".

There are two important alternative formulations of classical mechanics: Lagrangian mechanics and Hamiltonian mechanics. These, and other modern formulations, usually bypass the concept of "force", instead referring to other physical quantities, such as energy, speed and momentum, for describing mechanical systems in generalized coordinates.

The expressions given above for momentum and kinetic energy are only valid when there is no significant electromagnetic contribution. In electromagnetism, Newton's second law for current-carrying wires breaks down unless one includes the electromagnetic field contribution to the momentum of the system as expressed by the Poynting vector divided by c², where c is the speed of light in free space.

Limits of validity

Domain of validity for Classical Mechanics

Many branches of classical mechanics are simplifications or approximations of more accurate forms; two of the most accurate being general relativity and relativistic statistical mechanics. Geometric optics is an approximation to the quantum theory of light, and does not have a superior "classical" form.

The Newtonian approximation to special relativity

In special relativity, the momentum of a particle is given by

$\mathbf{p} = \frac{m \mathbf{v}}{ \sqrt{1-(v^2/c^2)}} \, ,$

where m is the particle's rest mass, v its velocity, and c is the speed of light.

If v is very small compared to c, v²/c² is approximately zero, and so

$\mathbf{p} \approx m\mathbf{v} \, .$

Thus the Newtonian equation p = mv is an approximation of the relativistic equation for bodies moving with low speeds compared to the speed of light.

For example, the relativistic cyclotron frequency of a cyclotron, gyrotron, or high voltage magnetron is given by

$f=f_\mathrm{c}\frac{m_0}{m_0+T/c^2} \, ,$

where f_c is the classical frequency of an electron (or other charged particle) with kinetic energy T and ( rest) mass m₀ circling in a magnetic field. The (rest) mass of an electron is 511 keV. So the frequency correction is 1% for a magnetic vacuum tube with a 5.11 kV direct current accelerating voltage.

The classical approximation to quantum mechanics

The ray approximation of classical mechanics breaks down when the de Broglie wavelength is not much smaller than other dimensions of the system. For non-relativistic particles, this wavelength is

$\lambda=\frac{h}{p}$

where h is Planck's constant and p is the momentum.

Again, this happens with electrons before it happens with heavier particles. For example, the electrons used by Clinton Davisson and Lester Germer in 1927, accelerated by 54 volts, had a wavelength of 0.167 nm, which was long enough to exhibit a single diffraction side lobe when reflecting from the face of a nickel crystal with atomic spacing of 0.215 nm. With a larger vacuum chamber, it would seem relatively easy to increase the angular resolution from around a radian to a milliradian and see quantum diffraction from the periodic patterns of integrated circuit computer memory.

More practical examples of the failure of classical mechanics on an engineering scale are conduction by quantum tunneling in tunnel diodes and very narrow transistor gates in integrated circuits.

Classical mechanics is the same extreme high frequency approximation as geometric optics. It is more often accurate because it describes particles and bodies with rest mass. These have more momentum and therefore shorter De Broglie wavelengths than massless particles, such as light, with the same kinetic energies.

Branches

Branches of mechanics

Classical mechanics was traditionally divided into three main branches:

Statics, the study of equilibrium and its relation to forces
Dynamics, the study of motion and its relation to forces
Kinematics, dealing with the implications of observed motions without regard for circumstances causing them

Another division is based on the choice of mathematical formalism:

Newtonian mechanics
Lagrangian mechanics
Hamiltonian mechanics

Alternatively, a division can be made by region of application:

Celestial mechanics, relating to stars, planets and other celestial bodies
Continuum mechanics, for materials modelled as a continuum, e.g., solids and fluids (i.e., liquids and gases).
Relativistic mechanics (i.e. including the special and general theories of relativity), for bodies whose speed is close to the speed of light.
Statistical mechanics, which provides a framework for relating the microscopic properties of individual atoms and molecules to the macroscopic or bulk thermodynamic properties of materials.

Retrieved from " http://en.wikipedia.org/w/index.php?title=Classical_mechanics&oldid=557267211"